D-Link DAP-2360 Wireless N PoE Access Point Mtech
D-Link DAP-2360 Wireless N PoE Access Point uses RADIUS technologies, i.e Personal and Enterprise versions of WPA and WPA2 (802.11i). To further protect your wireless network, MAC Address Filtering, Wireless LAN segmentation, Disable SSID Broadcast, Rogue AP Detection, and Wireless Broadcast Scheduling are also included.
DAP-2360 Wireless N PoE Access Point is ideal for any network, whether you are expanding an existing network or creating a new one this is the best router to go for. it uses 2.4Ghz with an internet speed of 300Mbps,
DAP-2360 Wireless N PoE Access Point downloading, sending, receiving documents becomes very fast, with its speed it is highly effective that deal with massive data transfer like banks.
DAP-2360 Access point allows network administrators to deploy a highly manageable and extremely robust 802.11n wireless network. The included antennas are detachable and provide optimal wireless coverage in the 2.4GHz (802.11g and 802.11n) band using a high power single radio design to reduce dead spots and increase capacity.
D-link access point is Enclosed in a white plenum-rated metal chassis, the DAP-2360 color allows the access point to easily blend into ceilings or walls and adheres to strict fire codes for placement in air passageways. For advanced installations, this high-speed Access Point has integrated 802.3af Power over Ethernet (PoE) support, allowing installation of this device in areas where power outlets are not readily available.
DAP-2360 D-link access point can be configured to optimize network performance based on any one of its multiple operation modes: Access Point, Wireless Distribution System (WDS) with Access Point, WDS/Bridge (No AP Broadcasting) and Wireless Client.
D-Link DAP-2360 access point with WDS support, network administrators can set up multiple DAP-2360s throughout a facility and configure them to bridge with one another while also providing network access to individual clients. Also included are advanced features such as Load Balancing, which optimizes high network traffic volume, and redundancy for fail-safe wireless connectivity.
DAP-2360 Wireless N PoE Access Point specifications
|Device Type||Wireless access point|
|Data Transfer Rate||300 Mbps|
|Data Link Protocol||IEEE 802.11b, IEEE 802.11g, IEEE 802.11n|
|Remote Management Protocol||SNMP 1, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, SSH|
|Frequency Band||2.4 GHz|
|Status Indicators||Power, WLAN|
|Features||VLAN support, MAC address filtering, Wireless Distribution System (WDS) support, wall mountable, Wi-Fi Multimedia (WMM) support, Quality of Service (QoS), Multiple SSID support, Network Access Protection (NAP)|
|Encryption Algorithm||128-bit WEP, 64-bit WEP, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise|
|Authentication Method||Radio Service Set ID (SSID)|
|Compliant Standards||IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.11b, IEEE 802.3af, IEEE 802.11g, Wi-Fi CERTIFIED, IEEE 802.11n|
|Gain Level||5 dBi|
|Expansion / Connectivity|
|Interfaces||1 x 1000Base-T – RJ-45|
|Compliant Standards||FCC Class B certified, IC, UL 2043|
|Power Over Ethernet (PoE) Supported||PoE|
|Service & Support||Limited warranty – lifetime|
|Min Operating Temperature||32 °F|
|Max Operating Temperature||104 °F|
|Humidity Range Operating||10 – 90% (non-condensing)|